Gantry crane operators manual

Telescoping Gantry Crane allows one operator to hoist heavy items easily. It’s designed for use with a trolley hoist (not included). This crane features an I-beam that adjusts from 99" to "H with 9 positive stops to provide a sturdy overhead lift point for lifting car engines, heavy. CONTACT INFO. Address: PO Box North Wayne St Angola, Indiana USA; Phone: Email: info@www.doorway.ru 24 Hour Sales and Services Support Phone: | Fax:

only. The surface the gantry crane rests on must be designed to withstand the loads and forces imposed by the gantry crane for the rated load. 2. Use in location that allows the operator to move and stay clear of the load. 3. Use warning signs and barriers on the floor beneath the gantry crane where overhead maintenance work creates a hazard. 4. FHS-SERIES STEEL FIXED HEIGHT GANTRY CRANES. Receiving Instructions. After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If the product is undamaged, discard the packaging. and Gantry Cranes The requirements of the Code of Federal Regulation; Title 29, Part , Slings. Knowledge of accepted guidelines as published by the EOT (Electric Overhead Traveling) crane industry governing bodies as well as local, state and Federal rules and regulations. Maximum capacity of the crane.

hoist weight allowance is 15% of the crane capacity (for example, a crane rated for pounds, allows for a pound live load plus pounds for the weight of the hoist). There is also an allowance of 25% of the crane capacity for impact caused by hoist use. Gorbel® Gantry Cranes. Operating a bridge or gantry crane is skilled work. This handbook advises employers and operators how to safely use these cranes. It explains: At the end of this document, there is information about slings and fittings, including signs of wear or damage on flexible steel wire rope and custom and homemade accessories. · The gantry crane should be maintained daily, monthly, every 12 months or after overloading. · The maintenance of the trolley and the hoist should be in accordance with relating manuals, ANSI/ASME B and B